s0022 - r06. (web) 20130104 product description features applications channel plan performance specification ns notes: [1] the maximum il is under all states of polarization and within the full operating temperature and wavelength ranges specifed. [2] all the parameters are without connectors. [3] the mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specifed llcc series min typical max unit center wavelength c refer to channel plan below nm channel spacing 20 nm channel passband 13 15 nm 1310 express passband 1260 1360 nm insertion loss within passband 1) 4ch cwdm 0.8 1.0 db 8ch cwdm 1.0 1.5 cwdm expansion (4ch cwdm only) 1.0 1.3 1310 express 0.6 0.8 passband ripple 0.3 0.5 db adjacent channel isolation 30 40 db non-adjacent channel isolation 45 50 db 1310 express isolation over cwdm bands 40 45 db cwdm expansion isolation over cwdm bands (4ch cwdm only) 13 15 db return loss 45 50 db directivity 55 db polarization dependent loss (pdl) 0.20 db polarization mode dispersion (pmd) 0.20 ps operating power 300 mw operating temperature -5 to +70 c storage temperature -40 to +85 c fiber type corning smf-28 package dimensions 3) standard (250 or 900m fber jacket) 58.0 x 30.0 x9.6 mm compact (250m fber jacket only) 52.0 x 27.5 x 7.6 1471.0 1491.0 1511.0 1531.0 1551.0 1571.0 1591.0 1611.0 llcc series oplinks green low loss coarse wavelength division multiplexer is designed to meet industrial stringent size and loss requirement. based on thin-film-filter (tff) and micro-optics, this low loss cwdm features small form factor, ultra low insertion loss, high channel isolation, and unparallel reliability. the technology is a lead-free packaging platform and no epoxy in the optical path. the green low loss cwdm is telcordia gr-1221and gr-1209 qualifed, and complied with industry green initia - tives such as rohs and weee. ? small form factor ? environmental green plan compliance ? ultra-low insertion loss ? high reliability ? high channel isolation ? epoxy-free optical path ? rohs 6 compliant ? wdm system for metro/access market green low loss cwdm
green low loss cwdm llcc series 46335 landing pkwy fremont, ca 94538 tel: (510) 933-7200 fax: (510) 933-7300 email: sales@oplink.com ? www.oplink.com s0022 - r06. (web) 20130104 product lines: ? mux/demux ? switching/routing ? coupling/splitting ? monitoring/conditioning ? amplifcation ? interconnect ? transmission ? hfc/rof subsystem ordering information mechanical drawing / package dimensions (dimension in mm) oplink can provide a remarkable range of customized optical solutions. for detail, please contact oplinks oem design team or account manager for your requirements and ordering information (510) 933-7200. * the tolerance of fber length is +/-0.1m (for connector option only, without connector, just keep the length as minimum). 1 meter is standard. the lead-time for special fber length will be longer. ** for other wavelength plan, please contact oplinks sales department for further information. standard package compact package note: port assignment will vary due to diferent confguration, please contact oplinks sales department for further information. llcc 0 0 2 1310 express port w/o exp = 0 w/ exp = 1 spacing cwdm expansion port channel plan package & fiber jacket type fiber length* 8ch cwdm = 0 4ch w/o exp = 1 4ch w/ exp = 2 8ch cwdm = 00 4ch cwdm 1471~1531 = 01 4ch cwdm 1551~1611 = 02 4ch cwdm 1511~1571 = 03 4ch cwdm 1471/1491/1591/1611 = 04 ** standard package w/ 250 m bare fber = s001 standard package w/ 900 m loose tube = s002 compact package w/ 250 m bare fber = c001 0.5 meter= h 1.0 meter= 1 1.5 meter= 5 2.0 meter= 2 connector type 20 nm = 2 none = 1 fc/pc = 2 fc/spc = 3 fc/apc = 4 sc/pc = 5 sc/spc = 6 sc/apc = 7 st = 8 lc/pc = 9 mu = a lc/apc = b
|
